Home Improvement, Remodeling and Repair @ Builders Websource. Home design software, advice, tools, videos, tech notes, links and more!

Search: 

Home Page | Books | BuildersTALK | Building a Dream | Green Building | Links | Software | Tech Notes | Tools | Contact

Messages and Online Forum Q&A

If you find the answer to this question useful, kindly CLICK TO PAY here.



Knowledge


BuildersTALK
Building|Dream
Green Building
How-To Books
Links (Web)
Newsletter
Tech Notes
Videos

Software


BeamChek
Bidding
CAD | AutoCAD
Estimating
EZHomeBuild
Home Design
Landscaping
Lighting Design
PrioSoft
Resi-Cost
Structural

Specialty Tools


CrackMON
Tools
WatrLevel

Support & Info


About Us
Advertise
Contact Us
FAQ
Publish
Services
Support

 

Re: Beams, Pilings and Sizing

From: info@builderswebsource.com
Category: Foundations and Basements
Remote Name: 63.198.181.43
Date: 14 Dec 2002
Time: 07:50 PM

Comments

When designing a foundation, whether it's for a house or a cabin as you propose, several factors come into play. First, if you plan to use pilings, you must know something about the soil and its load-bearing capacity. In the case of drilled-in-place piers, the skin friction of the soil is a key factor as is the soil expansion index. Typically, these figures are provided by a geotechnical company after drilling test samples. These factors influence the size, depth, and spacing of piers, taking into account specific loads due to both the structure, as well as snow or other live loads. If you're not familiar with structural principles, we recommend that you hire a licensed structural engineer to determine the size and type of foundation support members. Mixing steel and wood is sometimes challenging, a typical situation you face anytime dissimilar materials must be structurally connected. However, a good primer on structural design is available here on Builders Websource in our TECHNOTES section. Also, inexpensive software solutions for structural design such as BEAMCHEK are also extremely valuable for computing the size and spans of wood and steel beams. If you plan to use engineered lumber, such as Trus Joist or similar, each manufacturer offers span tables based on typical loads encountered in residential construction. The allowable span is based on safety. However, to ensure a quality feel to the structure, we always recommend designing for a very stiff floor (such as maximum total load deflection of SPAN/480 to SPAN/720).

Builders Websource

 

Article Tools

BuildersTALK


Ask an Expert
Recent Questions
Click to Pay

Archives


2006-2007
Oct-Dec 2002
Jul-Sep 2002
Jan-Jun 2002
Jul-Dec 2001
Jan-Jun 2001
1999-2000

 

 


ASTM International