Home Improvement, Remodeling and Repair @ Builders Websource. Home design software, advice, tools, videos, tech notes, links and more!

Search: 

Home Page | Books | BuildersTALK | Building a Dream | Green Building | Links | Software | Tech Notes | Tools | Contact

Messages and Online Forum Q&A

If you find the answer to this question useful, kindly CLICK TO PAY here.



Knowledge


BuildersTALK
Building|Dream
Green Building
How-To Books
Links (Web)
Newsletter
Tech Notes
Videos

Software


BeamChek
Bidding
CAD | AutoCAD
Estimating
EZHomeBuild
Home Design
Landscaping
Lighting Design
PrioSoft
Resi-Cost
Structural

Specialty Tools


CrackMON
Tools
WatrLevel

Support & Info


About Us
Advertise
Contact Us
FAQ
Publish
Services
Support

 

Re: beam replacement of interior load bearing wall

From: info@builderswebsource.com
Category: Structural
Remote Name: 63.198.181.43
Date: 13 Oct 2002
Time: 11:25 PM

Comments

Generally, to span a 22' clear opening which is also load bearing, will require a substantial beam. Of course, the size must be computed based on a detailed load analysis of all tributary and point loads falling on the beam. This could include second floor loads, roof loads, ceiling loads, wind and seismic loads, snow loads, etc. Furthermore, this load must be transferred to the exterior foundation. Foundation and exterior wall reinforcement may be required depending on the loads involved. We urge you to consult with a state licensed structural engineer who can evaluate your as-built conditions and make specific recommendations as to the use of glulam, steel, or other engineered wood options. Depending on the depth of the beam, you may not be able to conceal it fully inside the ceiling. For example, on one recent project, a glulam was used to span a 25' foot clear opening in a garage, carring a second floor load. This beam was approximately 19" deep by 6" wide. Since the ceiling joists were 2x12's, several inches of the glulam were visible in the garage. Builders Websource.

 

Article Tools

BuildersTALK


Ask an Expert
Recent Questions
Click to Pay

Archives


2006-2007
Oct-Dec 2002
Jul-Sep 2002
Jan-Jun 2002
Jul-Dec 2001
Jan-Jun 2001
1999-2000

 

 


ASTM International