Home Improvement, Remodeling and Repair @ Builders Websource. Home design software, advice, tools, videos, tech notes, links and more!

Home Page | Books | BuildersTALK | Building a Dream | Green Building | Links | Software | Tech Notes | Tools | Contact

Messages and Online Forum Q&A

If you find the answer to this question useful, kindly CLICK TO PAY here.



Knowledge


BuildersTALK
Building|Dream
Green Building
How-To Books
Links (Web)
Newsletter
Tech Notes
Videos

Software


BeamChek
Bidding
CAD | AutoCAD
Estimating
EZHomeBuild
Home Design
Landscaping
Lighting Design
PrioSoft
Resi-Cost
Structural

Specialty Tools


CrackMON
Tools
WatrLevel

Support & Info


About Us
Advertise
Contact Us
FAQ
Publish
Services
Support

 

Re: Bathtub fixtures

From: info@builderswebsource.com
Category: Plumbing
Remote Name: 63.198.181.43
Date: 13 Oct 2000
Time: 06:14 PM

Comments

This is an all-to-common problem. One of our "pet peeves" is lack of planning for future maintenance. A competent designer or architect who thinks ahead can try to locate the plumbing in such a way that the valves are accessible from behind -- such as an access panel in a closet, for example.

However, sometimes this is not possible or practical depending on aesthetic concerns or floorplan constraints. Generally, you have two choices, including access from the shower/tub side, or access from behind. It's a question of lesser evils. If you plan to replace the tub surround or tile, then you can replace the valves from the tub side. Keep in mind that you want to restore a proper moisture barrier so you don't inadvertently create a future leakage problem.

Alternatively, you may have to cut out a patch of sheetrock on your kitchen wall assuming the area is accessible and clear of cabinets. A pro can match it to look like new, although you'll have to repaint at least that wall.

Rather than replacing the fixtures outright, you may be able to replace the valve inserts, handles, and escutcheons only. This could preclude tearing into your walls.

In our home, our the valves on our downstairs shower share a common wall with the entryway from the garage. To provide future access, we installed a built-in ironing board on the other side of the wall. That way, should we require future maintenance, all we have to do is remove the ironing board and we have full access to the plumbing inside the wall.

However, in our upstairs bath, the fixtures are on an outside wall. For aesthetic reasons, we didn't provide an exterior access panel in this case.

Builders Websource

 

Article Tools

BuildersTALK


Ask an Expert
Recent Questions
Click to Pay

Archives


2006-2007
Oct-Dec 2002
Jul-Sep 2002
Jan-Jun 2002
Jul-Dec 2001
Jan-Jun 2001
1999-2000

 

 


ASTM International